The SP230-S5 802.11ac Wave 2 2x2 dual band outdoor access point provides a data rate of up to 1.1Gbps. Built in high transmit power for superior Wi-Fi coverage.
SP230-S5 as an outdoor wireless AP can operate in point to point, bridge & coverage modes. Based on 802.11ac Wave 2 technology, throughput is up to 1,167Mbps. With built-in high gain antennas & ERIP 38dBm, its coverage can be 400 meters & transmit over 6KM for video streaming at PTP mode.
It extends transmission for longer distance with reliability. It features low power consumption (<12W) & equipped with a PoE out capability that not only enables cost-effective deployment to applications such as surveillance but also solves the problem of labor shortage for equipment maintenance, speeding up network penetration.
Moreover, MU-MIMO technology maximizes throughput for high-density applications. With robust design of wide operating temperature, surge protection, IP67 rating, wind level 14 certificated & passed salt spray test, it can withstand harsh environments. The shape with 23.7-degree slope can prevent rain/snow accumulation. These feature SP230-S5 especially suitable for rural area.
Standards
IEEE 802.11a/b/g/n/ac |
Antenna Peak Gain
2.4GHz: 5dBi (Embedded) 5GHz: 11dBi (Embedded) |
Supported Data Rates
802.11b: 11 Mbps / 802.11a/g: 54 Mbps 802.11n: 300Mbps / 802.11ac: 867Mbps |
Frequency Bands and Operating Channels
Taiwan | 2.412 – 2.462 GHz; 11 channels 5.180 – 5.320 GHz; 8 channels 5.500 – 5.720 GHz ; 12 channels 5.745 – 5.825 GHz; 5 channels |
US | 2.412 – 2.462 GHz; 11 channels 5.180 – 5.320 GHz; 8 channels 5.500 – 5.720 GHz ; 12 channels 5.745 – 5.825 GHz; 5 channels |
EU | 2.412 – 2.472 GHz; 13 channels 5.180 – 5.320 GHz; 8 channels 5.500 – 5.700 GHz ; 11 channels |
China | 2.412 – 2.472 GHz; 13 channels 5.745 – 5.825 GHz; 5 channels |
Japan | 2.412 – 2.472 GHz; 13 channels 5.500 – 5.720 GHz; 12 channels |
India | 2.412 – 2.472 GHz; 13 channels 5.180 – 5.320 GHz; 8 channels 5.500 – 5.720 GHz ; 12 channels 5.745 – 5.865 GHz; 7 channels |
Notice | *Operating Channel depends on configured regulatory domain. |
Transmit Power
Max. | 2.4GHz: 35dBm w/ 2 ant. 5GHz: 38dBm w/ 2 ant. |
Notice | *The maximum power setting will vary by channel and according to individual country regulations. |
Indicator
Power / System / WLAN / WAN |
IP Rating
IP67 |
Physical Characteristics
Dimensions | 151 (L) × 75.5 (W) × 235 (H) mm |
Weight | 1kg |
Mounting type | Pole mount |
Bluetooth
Version | 4.1 |
Frequency | 2400 – 2480MHz |
Antenna | 1.5dBi (Embedded) |
Compliance Standards
IEC/EN 60950 EN55032 & EN55024 WEEE & RoHS Radio approvals: EN 300 328, EN301 893 (Europe) EN 301 489-1 and -17 (Europe) FCC NCC SRRC (China) IEEE standards: IEEE 802.11a/b/g/n/ac IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w, and z standards Multimedia: Wi-Fi multimedia (WMM) Security: Open System 802.1x WPA-PSK/WPA2-PSK WPA-Enterprise/WPA2-Enterprise Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS) EAP-Tunneled TLS (TTLS) Protected EAP (PEAP) EAP-Subscriber Identity Module (SIM) *Above partial functions should be configured by Z-COM Wireless LAN Controllers (WLC) |
Radio Chains
2.4GHz: 2x2:2 5GHz: 2x2:2 |
Antenna Type
2.4GHz: Omni antenna 5GHz: Directional antenna |
Bandwidth
20 / 40 / 80 MHz |
Receive Sensitivity
Min. | -99dBm |
2.4GHz | HT20: -90dBm/HT40: -86dBm |
5GHz | VHT20: -93dBm/ VHT40: -90dBm/ VHT80: -86dBm |
Interfaces
2 × 10/100/1000 BASE-T 1 WAN port support 802.3at PoE 1 LAN port support PoE Out (Max 10Watt, 45+/78-) 2 x 1GbE RJ45 port 1 × Ground terminal |
Supported Wireless LAN Controllers
WS5G2 / WS7G2 /WS10G2 |
Power
Power Consumption | < 12W |
Power Input | DC 48V, 0.5A PoE |
Environmental
Storage | Temperature: -40 ~ 80 ℃ Humidity: 10 ~ 90% |
Operating | Temperature: -40 ~ 70 ℃ Humidity: 10 ~ 90% (non-condensing) |
Package Contents
802.11ac Wave 2 2 x 2 Dual Band PtP/PtMP Outdoor Access Points. Mounting bracket included. Does not include power adapter. |
Optional Accessories
SP-CBM5 | Anti-theft steel rope + allen wrench + four screws |
SP-MKM5 | Two-dimensional mounting kit |
SP-WP-CM20 | SP-WP-CM20 |
SP-48063-XX | 48V PoE Injector + power cord |
Notice | *When ordering power adaptors, you must specify the destination region by indicating -US, -EU instead of -XX |