Model
C-Data FD504G-X-R410
PON Interface
1 x EPON Optical
PON Port Speed
Symmetric 1.25Gbps upstream/downstream SC/UPC single-mode fiber
PON Port Max. Splitting Ratio
1:64
PON Port Transmission Distance
20KM
PON Port Wavelength
Tx 1310nm, Rx 1490nm
PON Port TX Power
0 - 4dBm
PON Port Rx Sensitivity
-27dBm
PON Port Saturation Optical Power
-3dBm
Data Transmission PON Throughput
Downstream 980 Mbps; Upstream 950 Mbps
Ethernet Interface
4 x 1000Mbps RJ45 LAN
Ethernet Interface Transmission Distance
100 Meter
Data Transmission Ethernet
1000 Mbps
Power Interface
12V DC power supply
Data Transmission Packet Loss Ratio
<1 x 10E-12
Data Transmission Latency
<1.5ms
Network Management
OAM, WEB, Telnet
Management Function
Status monitor, Configuration management, Alarm management, Log management
Power Supply
<4.5W, 12V/0.5A power supply adapter
Operating Temperature
0 - 40 degree C
Operating Humidity
10% - 90% (Non-condensing)
Dimension
160 x 112 x 28.5mm
Specialty
FD504G-X-R410 XPON ONU is passive optical network terminal produced by C-Data for broadband access market based on XPON technology. Its are used together with XPON OLT to provide a complete broadband access solution. XPON technology is an emerging technology which takes advantage of PON technology and Ethernet technology. Its also points to multi-point network technology, and combined with single-fiber bidirectional technology. OLT device interconnected with multiple ONU through the passive optical network. XPON network system can use fewer fiber cable to meet the multi-user access needs of operators. FD504G-X-R410 fully meets IEEE802.3ah and CTC3.0 standard protocol. It has good compatibility to work with the third party OLT. It supports 1Gbps transmission rate up and down and provides users with good quality of service (QoS), flexible bandwidth allocation of Ethernet data service.
Others
User Ethernet Interface Detail: 4 x 10/100/1000M auto-negotiation Full Duplex / Half-Duplex, RJ45 Connector Auto MDI/MDI-X